How to smooth concrete After it Dries – The Definitive Guide

Unable to get how to smooth concrete after it dries? Well, the good news is, we made a guide on exactly what you are looking for. Sit back and read the full guide and not forget to give your insights on this article in the comment box

The process of completing a surface with softening is called “perfectly finished”. This is the final step in pouring concrete. This guide will show you the step-by-step guide on how to complete the task properly so that you can give your project the perfect finish.

This process should be completed at the correct time to avoid damage to the floor structure or else your concrete surface is going to be weak. It won’t sustain itself in the long run. It is very easy to do, but at the same time, it is important to consider all details as it is more than just about dumping the materials onto the ground.

Concrete mix can be sanded either manually or mechanically. We will give you the perfect process to follow. We have explained everything in a simple manner so that you won’t feel any complex. You can also add color and texture to concrete with this process. Let’s dive in.

Here are 4 Steps to Smooth Concrete After it Dries

Although it might seem easy at first, you may find that the end result is not what you expected. There are many things that could cause problems such as moisture, difficulty in leveling, extreme loads, or excessive abrasion. This is why it is important to be cautious when doing this. This is how we recommend you to do it.

These are the four steps to smoothen concrete after it dries.

  • Whatever the imperfections, just remove it
  • Clean up any debris you see and apply the adhesive
  • Add a fresh layer of concrete
  • Sand all the surface area and wash the concrete
  • You need to apply the vitrified to give the protection to the concrete

Polished concrete floors have many advantages. They reflect the natural light in the rooms and provide a high level of brightness and luminosity. It is the most crucial part that you should understand how to do it without any mistakes. 

Remove The Imperfections From the Surface

The very First thing you need to do is to remove all surface imperfections. You will need to remove all loose material from the floor by taking the help of a spatula. This is important as the original concrete must remain firm and adhered to well. This step must be done correctly to get the desired outcome. 

All surface imperfections must be repaired and removed. This should be done after you have cleaned the concrete. It will make the concrete surface more uniform and smoother, and it will also help the sealer stick better.

Clean The Debris and Apply The Adherent

When scraping the surface, make sure you remove all concrete and dust. Before applying adhesive, vacuum the area thoroughly. To thoroughly clean the area, sweep the entire surface. You must ensure that the surface is clean and even.

To clean concrete, we recommend muriatic acid. This strong cleaner will remove dirt, oil, and stains from concrete. This acid can also be used to soften the concrete’s top layer and prepare it for use. In a plastic container, you need to mix 7 parts water and 1 part muriatic acid.

Add a New Layer Of Concrete

Spread the mixture onto the floor. It is easiest to spread the mixture in stripes using a trowel. Be aware of unevenness as it may be necessary to match them. Let the first coat dry for several hours before reapplying.

Although the task might seem simple at first, the final results may not go in your way. There are also possibilities of humidity problems and difficulties leveling the area. Once you have finished removing the old concrete from the compound mix, you can apply the concrete you’ve mixed. Mix everything together and then spread it with a spatula.

Sand the Surface and Wash the Concrete

We recommend using an orbital sander for this final step. The idea is not too low. To remove any obvious irregularities, start with medium sandpaper. Fine-tune the surface with light sandpaper until it is smooth. To compact and smoothen the surface, we recommend using a hand plane.

We recommend adding water to concrete that dries quickly. This will give it a nice finish. Keep in mind that you should not add too much water as it could cause concrete damage. It is easy to do, but it is important to consider details as it is more than just sanding concrete.

Apply a Layer of Vitrifier to Protect the Concrete

How to smooth concrete After it Dries

To make concrete even more durable, you can seal it after curing. Before applying a sealer, clean the concrete well. To avoid puddles, we recommend using thin coats. Give a couple of hours before you apply the second coat.

After the dust has been removed, you can apply the vitrifier. Apply the sealer to the surface. Before you begin walking on concrete, it is essential that the sealer be allowed to dry completely.

Leave a Comment